Introduction
Polymer systems and Hosokawa Yoko responded to the Japan Construction Industry requirement in 1997 to develop a Collapsible Cartridge “Soft Cartridge” for Sealants and Adhesives. We manufacture 1 million pcs per month.
Adoption example ① Sunstar Engineering Group
MODIFIED SILICONE-BASED SEALING MATERIAL
Adoption example ② AUTO CHEMICAL INDUSTRY CO.,LTD
POLYURETHANE ADHESIVE ６００ｍL
“Auton Floor star” is adopted Soft cartridge with a film bottom
TS Cartridge
・TS has been developed for the consumer market for DIY application. ・Tip of TS is produced with specific AL laminated film. ・Contents are not affected by external air or UV.・TS can be squeezed by hand or used with a caulking gun. ・The Barrier Laminate Structure is “PE / PET / AL / PET / PE”. ・Nozzle can be attached to TS.
TS333mL TS100mL and more
Comparison Differences Metal Tube , Laminated Tube with TS Cartridge
・Metal tube is stiff and difficult for the user to squeeze out the contents.・Laminate tubes resist squeezing and cannot be used with a caulking gun.・TS can be used by manual application or caulking gun application.
Hand squeezing
・Easy to squeeze by hand.・TS body is very soft barrier laminate.・100% of contents can be squeezed from TS.
Working with caulking gun
・After contents are expelled, TS is reduced to a fraction of the original volume.・Disposal of the collapsed tube is more Eco Friendly compared to rigid sleeves.
A conventional caulking gun can be used with a special sleeve.
Special Caulking Gun for “TS-F1”
Special caulking gun for “TS-F1” is under development.
Special caulking gun for TS 100 Single Shot 100 ml
A Caulking gun is available for TS 100 size.
TS333(~100)
TS600~1000
Product adoption example
TS is adopted by SELLEYS, a leading adhesive manufacturer in Australia.
